How-To Install Raccoon 2 SE Accessories: RoboUP Garage, Front Wheels, Blades, Ground Stakes & Beacons
Installing and maintaining Raccoon 2 SE accessories is designed to be as simple as using the mower itself. In our short How-To guides, we show you exactly how to install and use key accessories, from the garage and replacement blades to ground stakes, wheels and beacons. An all in 1 guide, step by step, with no technical experience required.
Below is a quick summary of each guide, so you know exactly what to expect before getting started.
How to Install the RoboUP Garage on the Charging Station
The RoboUP garage protects your Raccoon 2 SE and Charging Station from heat and rain. Installation is quick and straightforward.
Steps:
1. Install the connector on top of the Charging Station
2. Secure the connector with four screws, tightening firmly
3. Place the garage cover onto the connector
4. Fasten the garage cover with two screws
In just a few minutes, your mower has a secure, weather-protected home.
Click here to watch the video: https://www.youtube.com/shorts/wMi079aXdPk
How to Replace the Front Wheels
If a front wheel needs replacing due to wear or damage, simply follow the steps below.
Steps:
1. Turn the mower upside down
2. Remove the decorative outer cover of the wheel
3. Unscrew the four screws and remove the wheel hub cover
4. Install the new front wheel hub cover and align the center hole correctly
5. Tighten all screws and reinstall the decorative cover
Your mower is ready to roll again with smooth, stable movement.
Click here to watch the video: https://www.youtube.com/shorts/CvqWcArZT1c
How to Replace Worn-Out Blades
Replacing blades regularly ensures clean cuts and optimal mowing performance.
Steps:
1. Turn the mower upside down
2. Use a screwdriver to remove the worn blades (three blades on the cutting disc)
3. Install the new blades securely
4. Double-check that all screws are fully tightened before use
This quick maintenance step keeps your lawn healthy and evenly trimmed.
Click here to watch the video: https://www.youtube.com/shorts/2H-LEuK1pEE
How to Use Ground Stakes to Create Physical Boundaries
Ground stakes allow you to create clear physical boundaries without wires, ideal for protecting flower beds or restricted areas.
Steps:
1. Pull out the stake head that’s inside the stake
2. Insert it into the stake cover
3. Space stakes approximately 40cm apart
4. Screw each stake vertically into the soil and secure firmly
Once installed, the stakes form a visible boundary that guides the Raccoon 2 SE effectively.
Click here to watch the video: https://www.youtube.com/shorts/JUzyNWvSdkQ
How to Use Beacons for Zone Mapping
Beacons help the mower recognize narrow passages and multiple zones during auto-mapping.
Steps:
1. Confirm all four beacons (A, B, C, D) are included
2. Before mapping, place beacons at both ends of a passage, arrows pointing at each other
3. Secure beacons inside the lawn edge using pegs, keeping a 10-15cm distance from pavement or non-grass areas
4. After auto-mapping is complete, remove the pegs and beacons
Beacons are only needed during mapping and can be removed afterward. The Raccoon 2 SE will remember the path after the first run.
Click here to watch the video: https://www.youtube.com/shorts/GHylb-WerGE
Designed for Real Life
This How-To guide reflects the philosophy behind Raccoon 2 SE. No complicated setup, no professional installation, and no unnecessary stress. From garage installation to blade replacement, everything is designed so anyone can handle it confidently.
For step-by-step visuals, watch the full How-To Shorts series on our YouTube channel and follow along at your own pace.
Available on Kickstarter, Raccoon 2 SE is offered with a limited-time Christmas Bundle, including 24 free blades and 5 ground stakes, all at the price of $406 (Total value is $688). That means you can save $282 because it’s Christmas! But be quick, quantities are limited, and the offer won’t last long.
Click here to back the Raccoon 2 SE on Kickstarter & grab your Christmas Bundle!
